When one starts to choose the Caster bearings necessary for an industrial application, there are a set of important items that need to be considered to ensure that the Caster bearings can withstand the most strenuous facets of that application.
image source: google
It's not the aim of this guide to cover the specifics of the procedure for establishing Caster bearings but rather to point out some very key items which should be considered prior to the purchase of those products. Industrial Caster bearings which are properly specified should offer a protracted life with minimal maintenance and upkeep.
1. Proper Sizing of this Swivel Section – The swivel section consists of the yoke and the upper plate. The top plate is what joins the Caster bearing into the cart or another piece of gear. The yoke base is where the legs which have the wheel are attached.
The circumference of the radius and the size of the ball bearings are reflective of the weight carrying capacity of the particular swivel section. At the low end of the industrial range, the chunks are usually 0.125" in diameter while the width of the race mode is usually 3" On the top end, the ball size generally is 0.625 and the width of the raceway is anticipated to be in the range of 6-8".
2. Hot Forged vs Cold Stamped – The second consideration is also connected with the swivel section. There are two fundamental processes by which the swivel sections are fabricated, one being cold stamped along with another being hot forged.